High and low temperature equipment manufacturers analyze expansion valve knowledge
The expansion valve is an important accessory in the high and low temperature integrated machine. The manufacturer tells you that there are various kinds of expansion valves, and different expansion valves have different differences.
The high and low temperature integrated machine expansion valve mainly has two kinds of thermal expansion valve and electronic expansion valve. Generally speaking, the electronic valve is used more. According to the driving method, it is divided into electromagnetic type and electric type. The electromagnetic type electronic expansion valve is attracted by electromagnetic force. The coil, the plunger (moving iron core), the valve needle, the valve seat, the reaction force spring, etc., the driving force of the electric electronic expansion valve is a motor, which is divided into a direct motion type and a speed reduction type.

Compared with the original thermal expansion valve, the advantages of the electronic expansion valve are quite numerous. The flow regulation is not affected by the change of the condensing pressure; it compensates for the change of the subcooling degree of the refrigerant before the expansion valve; because the electric signal is transmitted quickly, the execution action is rapid and accurate, so the flow can be adjusted accurately and timely, even if the change is severe, It can also avoid oscillation; it can control the evaporator outlet superheat to a small extent, thereby greatly improving the utilization of the heat transfer area of the evaporator; the same superheat setting can be set in the entire operating temperature range of the freezer. The value can be adjusted according to the actual condition of the freezer. It is not limited to the proportional adjustment. It can also use proportional integral or other adjustment rules, and can adjust the adjustment parameters.
The choice of different types of high and low temperature integrated machines in the manufacturer is somewhat different on the expansion valve. It is also very important for the cooling and heating effect. You should pay attention to its performance and quality.
Recomendaciones relacionadas
-
Purchasing Strategy of Ultra-low Temperature Freezer
938The performance of refrigeration system determines the overall performance. If refrigeration technology is good, excellent refrigeration effect can be achieved quickly. It takes only 4-5 hours on average from room temperature to minus 8 degrees Ce...
Ver detalles -
Control method for semiconductor test chiller to meet temperature requirements
1048The biopharmaceutical field requires high-precision temperature to control the activity of enzymes and the production of products; the chemical industry field requires specific temperatures to make chemical reactions proceed stably; the electronic...
Ver detalles -
Cooling simulation system for battery pack extreme performance test
1130With the development of technology, pure electric vehicles are becoming more and more common, but pure electric vehicles are difficult to get a better solution in terms of cruising range, charging speed, and pollution after battery waste. This mak...
Ver detalles -
¿Por qué las cámaras de temperatura y humedad constantes necesitan refrigeradores de agua?
864Las cámaras de temperatura y humedad constantes necesitan unidades de refrigeración por agua principalmente por las siguientes razones clave: Control preciso de la temperatura y la humedad: Las unidades de refrigeración por agua pueden proporcionar una capacidad de regulación de temperatura eficiente y precisa....
Ver detalles