Nota de parada de la condensación de purificación de gases residuales orgánicos
If the organic waste gas is purified and condensed, if it encounters a fault during operation, it should be shut down and disposed of in time. Then, how can LNEYA organic waste gas purification and condensation be used once it is shut down?
The organic waste gas purification condensing device introduces the volatile VOCS gas into the equipment cold box (the device sets the condensation temperature 3 ° C -40 ° C -75 ° C -115 ° C). Other temperature zones can be customized to follow the demand for gradual condensation liquefaction. Part of the continuous production process has done a two-way switching process in the low temperature section (after one side of the ice block, it is directly switched to another heat exchange cold box condensation, while the ice block side is treated with defrost). With the increasing attention to environmental issues, organic waste gas purification and condensation is favored by customers.
Once the machine is shut down, if the exhaust gas high pressure of the organic exhaust gas purification and condensation is solved, after the low water temperature fault is removed, if it is not solved, it is necessary to press the reset operation of the protection switch, and then the power is turned on after the shutdown switch. If the shut-off valve cannot be easily closed after tripping, the motor cannot be started directly across the current interrupter. The motor and wiring that require organic exhaust gas purification and condensation should be inspected in detail to find out the cause of the trip and how to deal with it. Just fine.
If you want to stop the organic exhaust gas purification and condensation operation under a relatively normal state, it is recommended that you do not stop the power supply directly. Remember to keep the oil heater in a state of constant heating during the shutdown state. Ultra-low voltage faults as well as high-temperature faults and flow faults are automatically reset after being eliminated. Once the auto-reset is required, the shutdown switch can be pressed again before it can be restarted, so that the organic exhaust gas purification and condensation can be operated more efficiently.
The organic waste gas purification condensing shutdown needs to be cautious. If the shutdown is improper, it may cause some failures. Therefore, the user needs to know clearly before proceeding.
Recomendaciones relacionadas
-
Precautions for the use of cooling and heating circulation device for lithium battery testing
1576As a professional experimental test auxiliary instrument, the cooling and heating circulation device for lithium battery testing is the circulating supply end of the cold source and the heat source, with a wide operating range. It is used in pharm...
Ver detalles -
What do the fault codes of air-cooled chillers mean
1870Generally, people will see 2 areas on thecontrol panel of the device, namely PV area and SV area. The first oneexpresses the specific temperature, and the latter one is for setting thetemperature. When a fault occurs, PV displays the number of ...
Ver detalles -
The necessity of high and low temperature testing machine for semiconductor chips
1592The rapid development of the chip industry is also obvious to everyone. LNEYA semiconductor chip high and low temperature test machine has also been continuously developed along with the development of the chip industry. There are tens of thousand...
Ver detalles -
Common faults of plate heat exchangers in new energy vehicle inspection
2186The reason for the excessive pressure drop of the new energy vehicle detection is that the running system pipeline is not properly purged, especially in the newly installed system pipeline, many dirt (such as welding slag) enters the interior of t...
Ver detalles
LNEYA Enfriadoras industriales Fabricante Proveedor










