glass reactor – LNEYA Industrial Chillers Manufacturer Supplier

Rotary Evaporator 1-50L

lneyaadmindy — Tue, 18 Jun 2024 05:59:34 +0000

Rotary Evaporator 1-50L

for Laboratory, Pilot-scale

Productos

glass reactor labortory equipment

Small desktop rotary Evaporator 1L~5L

Pilot and ground mounted rotary evaporators 10L~50L

Enquire for price

Rotary evaporator, also known as rotary evaporator. It consists of motor, distillation flask, heating pot, condenser and other parts. It is suitable for the concentration of small amounts of liquids. It is easy to operate, but the heating speed is slow and it takes a long time to achieve the desired evaporation effect. It is mainly used for continuous distillation of volatile solvents under reduced pressure conditions, and is used in chemistry, chemical industry, biomedicine and other fields.

Small desktop rotary Evaporator, easy to maintain 1L~5L
Capacity: 0.1-5L
Reaching vacuum:<133Pa
Bath temperature selection: 100℃ water bath/180℃ oil bath

Pilot and ground mounted rotary evaporators. Safe, durable, and efficient, customizable for high vacuum, explosion-proof, and pneumatic applications. 10L~50L
Reaching vacuum:<133Pa (customized 50Pa)
Bath temperature selection: 100℃ water bath/180℃ oil bath

Parámetros

for Laboratory

(Capacity is calculated based on actual)

1	Evaporation bottle（ml）	0.5+1L/29,(2L/29)
2	Collecting bottles（ml）	1L/S35
3	Condensing area (m2)	斜式0.14
4	Speed(rpm)	10-180
5	Maximum evaporation rate(H2O)**	1.2L/H
6	Reaching vacuum	<133Pa（1.33mbar，1Torr）
7	Bath power(kW)	1.3
8	Static temperature control range and fluctuation(℃)	0-99±0.2
9	Bath size (cm), capacity, material	φ24×15 6L SUS304
10	Alimentación	220V,1P,50/60Hz
11	Overall size(cm)	88x53x70H

1	PTFE Combined seal	•
2	PTFE Lower discharge valve	/
3	Bottle return device	•
4	Pressure relief port	/
6	Vacuum gauge	/
7	Digital Display	Bath temperature
8	Conical PTFE diaphragm	/
10	Bath lifting	•
11	Reflow	•
12	Steam temperature measuring port	/
14	Water bath cover	O
15	Conversion interface	O
16	Alternative evaporating flask	100ml,250ml,2L

Pilot-scale

(Capacity is calculated based on actual)

1	Evaporating flask (L)	10L/F95
2	Collection bottle with drain port (L)	5L/F40
3	Condensation area (m2)	0.57
4	Rotating speed(rpm)	3-110
5	Evaporation rate(H2O)**	3L/H
6	Reaching vacuum Pa	<133Pa(1.33mbar,1Torr)
7	Bath power(kW)	3/2(Ex or Oil)
8	Static temperature control range and fluctuation(℃)	0-99±0.2
9	Bath size (cm), capacity, material	φ35x25H,22L,SUS304
10	Alimentación	220V,1P,50/60Hz
11	Machine size (cm)	95x50x180H

1	Glass connection	Ground mouth with PTFE diaphragm
2	Electric lifting bath	/
3	Continuous collection in series	/
4	PTFE Combined dynamic seal	•
5	Frequency	•
6	Feed valve	Glass
7	PTFE Discharge valve	PTFE
8	Vacuum gauge	•
9	Vacuum Throttle Valve	•
10	Cooling water quick connect connector	/
11	Steam temperature measuring port	/
12	Digital Display	Bath temperature and speed
13	Stainless steel rack*	/
14	Large evaporation aperture upgrade*	/
15	Anti-collision system	/
15	Low temperature cold trap	/
16	Bottle unloading rack	/
17	Steam heating*	/
18	Optional evaporating flask (customizable pressure groove type)	5L
19	Ex explosion-proof upgrade*	O

Symbol meaning:/- None, ● – Equipped, ○ – Optional (* – This optional function must be assembled during factory production and cannot be separately equipped)
Note: The specific parameters of the associated models or customized models may differ from those of the standard models. You can contact us for specific inquiries.

Descripción del producto

The sealing technology adopts unique design and precise processing technology, resulting in higher air tightness
High borosilicate glass material, corrosion-resistant, enhances service life
Perfluorinated discharge, effectively preventing contamination of materials
The overall glass and stainless steel are export standards, which are stable and reliable.
Stainless steel bath heating, stable and reliable
Professional explosion-proof technology, safe operation.

Someter a consulta

Le responderemos en 24 horas

Correo electrónico: sales@cnzlj.com

WhatsApp: 086 13912479193

Laminated Glass Reactor

lneyaadmindy — Tue, 18 Jun 2024 05:13:03 +0000

Laminated Glass Reactor

5L, 10L, 20L, 50L, 100L, 500L

Productos

glass reactor labortory equipment

Enquire for price

Double-layer glass reactors are suitable for the reaction of large amounts of liquids. The heating speed is fast and uniform, but the operation is more complicated and requires strict control of temperature and pressure. The interlayer circulates through the cold and heat sources. The interlayer of the glass reactor can provide high-temperature reactions (the highest temperature can reach 300°C); the glass reactor can also do low-temperature reactions (the lowest temperature can reach -80°C); the glass reactor can be evacuated for negative pressure reactions.

The body of the three-layer glass reactor is a double-layer structure. The inner interlayer is connected to the temperature control circulation device, and the temperature of the material in the reactor is adjusted by the circulating liquid; the outer interlayer can be pumped to a negative pressure state to achieve a vacuum insulation function, which can prevent the reactor body from frosting under low temperature conditions and facilitate observation of the reaction conditions in the reactor.

Glass jacket open cover reactor
Special durable mixing shaft seal
Double layer anti-corrosion mixing paddle
Bottom discharge valve with no liquid accumulation and large diameter
Stainless steel frame
Variable frequency over torque protection mixing control
Explosion proof models are optional

Parámetros

1	Reaction kettle body (L) (open cover type)	10L, 50L,100L,150L
2	Maximum discharge diameter(mm)	∅32
3	Number of kettle cover interfaces	7
4	Rotating speed(rpm)	20-400
5	Torque(Ncm)	390
6	Stirring rod diameter(mm)	∅20
7	Alimentación	220V,1P,50/60Hz
8	Overall size(cm)	110x60x230H

Function Configuration

1	Frequency	●
2	Digital Display	●
3	PTFE combined seal	●
4	PTFE direct discharge valve	○
5	PTFE closed discharge valve	●
6	PTFE filling valve	●
7	Dropping system(L)	5L
8	Solid feed port	F80
9	Thermometer	●
10	Vacuum gauge	●
11	Tangential interlayer inlet and outlet	F40-M30x1.5
12	Reflux condensation	●
13	Distillation-layering-collection	○ (10L)
14	Distillation collection *	○
15	Sampling bottle	○
16	Jacket pressure regulating device *	○
17	Kettle pressure relief valve *	○
18	Kettle body spoiler baffle	○
19	Stainless steel base	●
20	Moving pulley	●
21	Explosion-proof/Pneumatic Modification*	○
22	Overcurrent protection	●
23	Spark-free electronic control system	○

Descripción del producto

Kettle cover configuration (above 10L)

● Feeding valve—clean feeding throughout the process, no pollution
● Thermometer—directly measures material temperature
● Condenser—ball mouth connection, easy to install and shock-absorbing
● The kettle cover interface is fully upgraded to flange connection, equipped with SENCO quick-release flange clamping ring. The interface is not bitten and the glass is not damaged.
● The main bottle has no cone mouth, eliminating the damage to the bottle body caused by the cone mouth biting

PTFE bottom side discharge valve:
No dead angle, no liquid accumulation, maximum discharge diameter Ø20~32mm. The pre-tightened structure can effectively reduce the risk of accidental damage to the reactor body due to excessive top rotation of the bottom valve, which is particularly important for pilot reactors.

Quick-release flange clamping ring:
It can provide a new experience of flange connection with high airtightness, high corrosion resistance, and easy loading and unloading.

PTFE feeding valve:
The latest structure and material design, high clean feeding throughout the process, high corrosion resistance and wear resistance.

Mirror flange processing technology:
SENCO flange uses fine cold grinding and polishing technology to ensure the airtightness of static interface connection.

Someter a consulta

Le responderemos en 24 horas

Correo electrónico: sales@cnzlj.com

WhatsApp: 086 13912479193