The automotive industry must ensure that its products operate over this wide temperature range and do not fail or material fatigue under rapid temperature changes.
Therefore, material and component testing, including temperature simulation, is very important and indispensable for the automotive industry, including all suppliers.

On the test benches in the automotive industry, highly dynamic temperature control systems are used for material and component testing, which can achieve precise regulation and rapid temperature changes. Only precise temperature management can provide reliable and repeatable results. The temperature control system provides a constant temperature or a complex temperature curve to the test bench directly or indirectly through a liquid medium. In addition to the temperature of the medium, temperature control systems also allow precise control of flow rates and operating pressures. Temperature control systems are used primarily in two ways: They simulate external ambient conditions in climate chambers or replace internal systems, such as the cooling circuit of an engine. The latter allows realistic conditions to be created on test benches, where test specimens are supplied with coolant according to operational requirements, such as in a vehicle.

Suministramos a nuestros clientes de la industria automotriz dispositivos de alto rendimiento. Estos no solo cubren dinámicamente todo el rango de temperatura, de -40 °C a +160 °C, sino también los rápidos cambios de temperatura requeridos en los bancos de pruebas.

● Efficient production stability and repeatability results;
Utilización de intercambiadores de calor de placas y calentadores de tuberías para mejorar los índices de refrigeración y calefacción;
● Very wide temperature range, no need to replace liquid medium;
Sistema totalmente cerrado que prolonga la vida útil de los líquidos conductores térmicos;
● Adopting magnetic drive pump, there is no problem of shaft seal leakage

Can meet the direct cooling/direct heating for battery pack and vehicle testing and testing. This equipment is mainly used for cooling and heating capacity testing. It uses variable frequency compressor with adjustable output;

The testing unit needs to use specific temperature change curves and record temperature changes; The temperature range is usually -40 ℃ to 100 ℃ (can expand to 150 ℃); When conducting tolerance testing, it is usually done in an infinite cycle.

Suitable for more simulation test temperature control
Equipment application: new energy battery pack, battery module, battery cell, motor and controller, charger, DC/DC converter, electronic pump

Low Temp/Normal Temp Chillers (Biochemistry Pharmaceutical Process)

Temperature Control :-5℃~-150℃

Control de temperatura para diversos reactores, sistemas de destilación o extracción, laboratorios, institutos de investigación, químicos, farmacéuticos, petroquímicos, bioquímicos, médicos, hospitales, talleres de investigación y desarrollo, pruebas de semiconductores, aeroespacial, biología.

Sistemas de control de temperatura dinámica (Biochemistry Pharmaceutical Process)

Temperature Control :-120℃~350℃

Temperature control for high pressure reactor；Double-layer glass reactor；Double-layer reactor；Microchannel Reactor；Distillation system；Material aging test；Vacuum chamber etc.

Control Temperature Control Flow Systems（Vehicle/Battery Pack Test)

Temperature Control: -40℃~100℃

Simulación de temperatura para pruebas de calidad de vehículos: prueba de duración de la batería, banco de pruebas de inyectores/motores de combustible, prueba de airbags, banco de pruebas de componentes, etc. Puede simular las condiciones ambientales externas en la cámara climática o sustituir el sistema interno, lo que puede crear las condiciones de temperatura reales necesarias para el banco de pruebas.

Cooling Heating Systems (Semiconductor Production）

Temperature Control: -85℃~250℃

Suitable for semiconductor process wet washing, photolithography, etching, chemical meteorological deposition, physical meteorological deposition, and the electronics industry (photolithography process)