Sonda térmica

KDS -75℃～+200℃

Supports rapid heating and cooling from extremely low temperatures to high temperatures. The fastest rate can reach 50’C/min. It can accurately control the temperature, and the error is usually within +0.2℃.

Envíenos su consulta

Cooling Capacity -40℃@600W

Heating cooling rate Up to 50 ℃/min

Temperature Accuracy ±0.2℃

Se consume energía

KDS SERIES

-75°C

más bajo

200°C

Más alto

±0.2℃

Precisión del control de temperatura

Modelo	KSD-705-75℃~200℃士0.2℃
Temperatura	-75℃~200℃
Precisión de temperatura	±0.2℃
Heating and cooling rate	Up to 50 ℃/min
Capacidad de refrigeración	-40℃@ 600W
Temperature monitoring type	Plunger: PT100; External: K-type, T-type PT100、 communication
Temperature control mode	Plug-in/external cascade process control
Control panel	Human machine intelligent interface
Modo de control	The equipment adopts PLC control mode
Power 220V 50HZ	200~230VAC 50/60HZ16A max
External dimensions	524mm(w)638mm(L)361mm(H)
Test piece force adjustment	70~300kgf

CDA requirements
Dew point temperature -70 ℃, filtration accuracy 0.01um, pressure 0.7Mpa

Test pressure head
45mm/55mm/75mm optional

Comunicación
Modbus RTu protocol RS485 interface, optional CAN communication bus, Ethernet interface TCP/IP protocol

LNEYA nunca decepciona a los usuarios！.

Features of Thermal Probe

The test head is designed with a dry gas channel layout to provide low dew point gas to the equipment, which can keep the DUT and test head in a stable dry environment without condensation or freezing.

Enviar consulta ahora

LNEYA nunca decepciona a los usuarios！.

How it works of Thermal Probe

The sensor is installed on the plunger module, which provides more timely and accurate temperature response.

The plunger module can be customized for easy disassembly and assembly.

The device is equipped with an external sensor receiving port that can directly measure the measured object. Switching to workpiece mode allows for direct control of the temperature of the tested component.

Enviar consulta ahora