Refrigeration and heating temperature control system for multiple reactors

1. There are some differences in the quality and configuration of the refrigeration and heating temperature control systems of multiple reactors from different manufacturers. Some equipment will have some noise during operation, and the noise is largely related to mechanical stress.
2. You can check whether the screws on the base of the equipment are normal, whether the force is uniform, and whether they are fixed. If the screws of the unit are loose, use a wrench to tighten the screws of the lower base.
3. The operator has a clear understanding of the operation instructions and maintenance knowledge of the refrigeration and heating temperature control systems of multiple reactors.
4. Do a good job in the maintenance and cleaning of the key components of the refrigeration, heating and temperature control systems of multiple reactors.
5. Protect the key parts of the equipment. If it is easy to get wet, it is necessary to do a good job of anti-layer work.
6. For the heat preservation treatment of the refrigeration and heating temperature control systems of multiple reactors, due to the large number of internal parts, it is necessary to ask technical personnel to operate under the guidance.
7. In order to obtain better treatment effect, enterprises need to choose good thermal insulation materials when completing thermal insulation treatment. Good thermal insulation effect will help to improve the operation effect of the equipment and reduce the failure rate of the equipment.
8. The installation of the circulating pipeline should facilitate the discharge of the gas in the pipeline. If there is leakage, stop the operation in time and use it after repairing; the electric control cabinet should avoid dust accumulation, and should be regularly purged with compressed air to ensure good electrical contact. Always check the contacts of electric heating tubes, fuses, meters, electric contact pressure gauges, and relays.
Our LNEYA dynamic temperature control system SUNDI series, HR series and WTD series can be used for temperature control of reactors, and one or more units can be controlled at the same time. If you have needs in this regard, you can leave us a message and send an email to sales@lneya.com
Recomendaciones relacionadas
-
¿Cuáles son los principales usos de la unidad de calefacción y refrigeración del reactor?
1002The reactor heating and cooling device is suitable for high-purity metal, rare substance purification, laboratory environment simulation, magnetron sputtering, vacuum coating and other industries. Large cryogenic pump units can provide a cooling e...
Ver detalles -
483Meet Your Dream Equipment for Distillate CBD Extraction
1237If you need equipment to distill CBD, you need to scrutinize your choices, as the equipment can vary in its features and design. When you use equipment that produces a CBD distillate, you want to seek out a system made by a manufacturer that provi...
Ver detalles -
Precauciones de funcionamiento del equipo de control de temperatura del reactor serie ZLF/SR
1118The temperature control equipment of the reaction kettle adopts the PID control method, which greatly improves the temperature control accuracy of the whole machine. The microcomputer for cooling or heating will automatically switch to work accord...
Ver detalles -
Cuál es el refrigerante de la enfriadora de recirculación
1043Diferentes industrias tienen diferentes requisitos para la temperatura de refrigeración del enfriador de recirculación, por lo que el refrigerante seleccionado también es diferente. A la hora de elegir un enfriador de recirculación, también es necesario...
Ver detalles