From what aspects should we consider the use of circulating coolers?
Circulating coolers are a popular choice for temperature-critical applications because they provide stable temperature control, constant flow and constant pressure control. Many process heating systems require cooling and heating. For example, many conveyor heating zones have cooling zones. Injection molding requires a lot of heat dissipation. And the reactor is usually jacketed with cold water. There are many ways to cool this type of system, including tap water, tower water, building chilled water, and circulating coolers.

Circulating coolers are a popular choice for applications with strict temperature requirements. They provide stable temperature control-usually within 0.1°C, and provide constant flow and constant pressure control. They can be cooled to below ambient temperature, and when equipped with a heater, they can be kept above ambient temperature.
There are a variety of recirculating cooler products in the industry, manufacturers and options to choose from, choosing the right system for your application can be a challenge. However, there are three main considerations:
First, you need to define basic cooler requirements, such as capacity, coolant temperature, coolant and flow rate. Second, you need to determine which additional options are needed, such as heaters, auto-start functions, filters, alarms, and communication functions. Finally, you should consider other details such as noise level, size, warranty, and after-sales service and support.
Coolant flow and pump options. Most chiller manufacturers offer a choice of pumps with chillers. Positive displacement pumps are popular because they provide constant flow regardless of the pressure drop across the system. One of the disadvantages is that they need to be replaced regularly. Centrifugal pumps have a longer service life, but because the flow rate depends on the pressure drop across the system, they may not be suitable for applications with high pressure drops. Turbo pumps have the reliability of centrifugal pumps, but can provide greater pressure drop. To choose the right pump, you first need to consider the required flow rate and pressure drop in the system. Then, if there is more than one type of pump that meets your requirements, you should choose based on factors such as maintenance and cost.
Choose the right coolant. Most standard models of chillers can treat ordinary distilled water or tap water as a coolant. It may be necessary to add additives such as algaecides to prevent algae growth. For set points below 10°C, it is recommended to use a mixture of glycol and water to lower the freezing point of the fluid. (Another advantage is that adding glycol can inhibit corrosion and algae.) Using a mixture of glycol and water will affect the cooling capacity of the cooler because it does not transfer heat like pure water. If your application requires, most chiller manufacturers also provide options for deionized water and high-purity application systems.
When choosing a cooler, some other considerations may be important for your application. If people are going to work near the chiller, you may need to consider the level of noise it generates, as this will vary between manufacturers.
(The above content comes from network data, if you have any questions, please contact to delete.)
Recomendaciones relacionadas
-
How to protect the zero-86 degree low temperature refrigerator?
1213The structure of the scroll compressor and the piston compressor in the low-to-86 degree low-temperature refrigerator is different, and it cannot be reversed. The reverse phase of the three-phase power supply of the low-zero-86 degree low-temperat...
Ver detalles -
2019 CPHl China | LNEYA W5P22 Exhibition Site&Wonderful
1035From June 18th to June 20th, 2019, the 19th World Pharmaceutical Raw Materials China Exhibition - CPhI China 2019 was held at the Shanghai New International Expo Center. LNEYA took a variety of equipment to the W5P22 booth, which lasted for three ...
Ver detalles -
¿Por qué hay aire en el sistema de control de temperatura del reactor?
939El gas de impurezas en el sistema de control de temperatura del reactor es para aumentar la presión de condensación del sistema de refrigeración, aumentando así la temperatura de condensación, el aumento de la temperatura de escape del compresor, el aumento de la poten...
Ver detalles -
Circulador De Baja Temperatura De Wuxi Guanya Tiene Más De 10 Años De Exploración E Innovación, Precipitati
1087Wuxi Guanya Refrigeration technology co., ltd is a professional manufacturer of refrigeration equipment in China. It is a production technology-oriented enterprise integrating R&D, production, sales and after-sales. It specializes in the produ...
Ver detalles