Buscar en toda la estación
El gas de impurezas en el sistema de control de temperatura del reactor es para aumentar la presión de condensación del sistema de refrigeración, aumentando así la temperatura de condensación, el aumento de la temperatura de escape del compresor, el aumento de la poten...
Ver detallesWhen the explosion-proof type hot and cold integrated machine is used at the end of the day or when it is not used by the standby, be sure to disconnect the cooling water connection pipe, clean the remaining cooling water in the pipe, and store it...
Ver detallesPerformance: In order to be able to select the type of pump that is suitable in the pharmaceutical laboratory, it is necessary to have a deep understanding of its performance and understand the difference in its specific working principle. To this...
Ver detallesThe battery cooling system of the new energy model first unscrews the three screws on the upper part of the wet curtain, holds the louvers on the upper part of the wet curtain, gently pulls the wet curtain outward and then lifts it up slightly to ...
Ver detallesThe high temperature test equipment is mostly caused by water shortage in the water circulation. This way, the purified water is replenished to the water tank until the water level meter on the lower right side of the water tank reaches about 80% ...
Ver detallesProduct Overview:Microcomputer control, multiple security protection, and more reliable operation; Single-compressor automatic cascade supercooling refrigeration technology; compressors use Secop and France Taikang brandContactors and circuit br...
Ver detallesThe ultra-high temperature material impact test chamber test device has too much frozen oil in the evaporator, which can also cause insufficient cooling and cause slow cooling. The oil stored in the evaporator of the ultra-high temperature materia...
Ver detalles¿Cómo instalar y depurar el sistema eléctrico de la cámara de pruebas de cambio rápido de temperatura? Necesidad de referirse a los siguientes métodos para la distribución de energía, prestar atención a la capacidad de la fuente de alimentación, no utilice una sola fuente de alimentación para múltiples e...
Ver detallesThe heat transfer oil electric heater is a new type of thermal energy conversion device that uses electricity as the energy source and heat transfer oil as the heat transfer medium. It can provide circulating heat transfer oil of circulating pump ...
Ver detallesThe amount of cooling capacity of the screw chiller is directly related to the energy consumption and operational economics of the entire unit, which is worthy of attention. Especially when designing a cold station, there is no single chiller in t...
Ver detalles
LNEYA Enfriadoras industriales Fabricante Proveedor
