Buscar en toda la estación

  • KRY -40℃~+100℃ (1to3)

    2038

    Dimension(A) cm Temperature range is -40℃~+100℃, which can be extended to +135℃ according to the actual situation, and the temperature control accuracy is plus or minus 0.5℃. Theequipment can control the flow and...

    Ver detalles
  • KRY 0℃~+100℃ (1to2)

    1805

    Temperature range is 0℃~+100℃, which can be extended to +135℃ according to the actual situation, and the temperature control accuracy is plus or minus 0.5℃. The equipment can control the flow and pressure independently ...

    Ver detalles
  • KRY 0℃~+100℃ (1to3)

    1685

    Test temperature of main test items of vehicle electronics: IC test conditions for locomotives: -40℃~125℃, wind blowing, sun exposure, high vibration; Instrument panel operation te...

    Ver detalles
  • KRY 0℃~+100℃(1&6)

    1762

    Temperature simulation for vehicle quality test: battery life test, fuel injector/motor test bench, airbag test, component test bench, etc. It can simulate the external environmental conditions in the climat...

    Ver detalles
  • KRY -25℃~+100℃

    1805

    Temperature range is -25℃~+100℃, which can be extended to +135℃ according to the actual situation, and the temperature control accuracy is plus or minus 0.5℃. The equipment can control the flow and pressure independently w...

    Ver detalles
  • KRY -20℃~+100℃ (1to6)

    1621

    The System Process Flow Is As Follows: The liquid refrigerant in the evaporator of the unit is exchanged with the circulating air in the interior of the tank. The temperature rises from liquid to gas, and is sucked into th...

    Ver detalles
  • WTD-Zona de temperatura dual

    1322

    Está especialmente diseñado y desarrollado para las características de pequeña capacidad de retención de líquido, fuerte capacidad de intercambio de calor y gran caída de presión en el sistema de circulación del reactor de microcanal.

    Ver detalles
  • HR -25℃~200℃

    1793

    The cooler is a very important part of the screw air compressor. The main function is to cool the lubricating oil of air compressor and the compressed air. If it's blocked, then the temperature will go up. A...

    Ver detalles
  • HRT -45℃~250℃

    1798

    The cooler is a very important part of the screw air compressor. The main function is to cool the lubricating oil of air compressor and the compressed air. If it's blocked, then the temperature will go up. A main cause of t...

    Ver detalles
¡Amplíe más!